Smaw Welding Machine
DSP Digital Hi-speed Pulse Inverter Welding Machine
Process
1.Technical parameter
|
Model Contents |
DSP-350 |
DSP-500 |
DSP-630 |
Input power source |
3-phase 380V 50/60Hz |
||
Rated input curr. |
20.7A |
35A |
52A |
Rated input capacity |
13.6KVA |
23KVA |
34.2KVA |
Rated welding curr./volt. |
350A/31.5V |
500A/39V |
630A/44V |
Rated duty cycle |
60% |
60% |
60% |
No-load voltage (MAX) |
62V |
73V |
84V |
Adjust range of welding curr. |
40-350A |
40-500A |
50-630A |
Efficiency |
85% |
85% |
85% |
Factor |
>0.95 |
>0.95 |
>0.95 |
Suitable wire |
Φ0.8-Φ1.6mm sold, SS, Al, AlSi, AlMg, bronze, brass, copper wire |
||
EMC |
A type |
||
Insulation class |
F |
||
Protection class |
IP21S |
||
2.FAQ
1.Q: What’s the difference between DSP series and NBM Series?
A: 1)DSP is the new-generation all-digital pulse welding machine;
2) NBM adopts one-pulse one-drop technology, while DSP’s pulse is hi-speed pulse, its speed is higher and arc force is more concentrated;
3) NBM support only welding of Al, AlSi, AlMg, DSP-XXXDG also supports welding of SS, Carbon steel, copper and brass.
2.Q: Is it water-cooling or air cooling?
A: Water-cooling type is suggested, because its cooling means will be better.
3.Q: Which kind of wire feeder will be offered together?
A: We will offer all-digital closed-type four-wheel wire feeder with euro socket.
4.Q: Which kind of torch should be used with the machine?
A: If you order the machine with standard configuration, we will offer you euro-type water-cooling torch with 3m cable. If you need torch with longer cable, you can inform us while placing an order.
5.Q: How long cable will you offer?
A: If you order the machine with standard configuration, the length of welding cable and control cable will be 5m and length of gas hose will be 6m. If you need longer cable, please inform us while placing an order
DETAIL CHART
